Ball Valves

Introduction
SD range of Ball Valves comes in two-piece or three-piece design, with or without vent and various end connections as per customer's requirements. Various components used in the manufacture are machined to the exacting tolerances resulting in a very precise and accurate valve as a whole.

Bodies are so designed and machined that the handles are not blown off because of the load and the position of the handle shows the direction of flow. Various seat materials are used for different applications, pressure and temperatures. Glass filled PTFE, Delrin can be used as a seat material. Balls used are very precisely machined and lapped for ease of operation and low operating torques and also to give maximum results. Various port connections can be provided.

Features :

• Full-ported design, which means an unrestricted, bore which results in low-pressure drop.
• Wide variety of end connections.
• Wide variety of material. of constructions
• Quarter turn quick manual actuation.
• Low operating torque.
• Strong and compact body construction.
• Handle indicates direction of flow.
• Optional vent porting.
• All valves are 100% factory tested prior to shipment.

Types :

• High Pressure Ball Valve : Series - H
  Max. Std. Pressure - 6000 Psi (413 Bar)
• Low Pressure Ball Valve : Series - L
  Max. Std. Pressure - 3000 Psi (207 Bar)
• Instrumentation Ball Valve : Series - I
  Max. Std. Pressure - 3000 Psi (207 Bar)